Electric Scooters For Kids

Carburetor Intake Breather

Tips For Cleaning Car Engine

Cleaning car engine is one of the most neglected tasks by the car owners as the engine resides under the hood and doesn't has any role in cars overall road presence. But most of you may not be aware that like anything else, cleaning car engine falls highly essential for its better performance. Here are few useful tips for the owners who are planning to clean their car's engine.

1) If engine is heavily soiled, run it for an about a minute so that the soil loosen its grip from the engine surface.

2) For making the task of cleaning the engine of your car an environment-friendly process, move the car to a location where the oil and sludge residue of the engine do not enter a stream drain.

3) Disconnect all the electrical connections by removing negative and positive terminal cables one after another.

4) Now its time to cover those parts with water bag where entering of water can cause a damage or fault. Specially, all of the electrical component should be kept safe from water. It is recommended to cover the breather or air intake and carburetor through Plastic or aluminum foil.

5) Use a stiff bristle paint brush for removing any loose debris or dirt on the engine surface.

6) After cleaning the dirt, it comes to the most fun part of this car engine cleaning process. Make a solution of water and dish detergent and apply the solution on the engine. Let it react with the grease and dirt and than gently scrub the dirt out.

7) If you are still not able to remove the grease or if there is heavy grease on the engine surface, use a recommended engine de-greaser that can be bought from any automotive supply store.

Rinse the engine with water and clean away the residue of dirt water and the chemical that you used. Now, remove the plastics you used for covering up the components.

About the Author

Now Pay Close Attention Here- If you want to know how to make your car perform at its maximum potential, go check out the other car maintenance tips now at http://carzy.co.in/blog/car-maintenance-tips/ !

Carburetor Breather Pipe $3.96 Carburetor Breather Pipe for 50cc 4-stroke QMB139 engines. OD 8.48 mm ID 5 mm

Breather $13.49 Breather

Carburetor $49.59 Carburetor for 50cc 2-stroke 1DE41QMB engines. Outer Diameter (Intake): 28mm Inner Diameter (Intake): 26mm Bolt Hole Spacing: 44.5mm

HSR42 Smoothbore Carburetor Kit $539.99 Mikuni HSR42 "Smoothbore" Carburetor Kit Kits include the redesigned 42mm smoothbore carb in a natural finish Easier, faster installation using stock CV throttle cables Excellent throttle response, more power, improved acceleration and better gas mileage Order fewer part numbers to cover more applications Installation instructions and hardware included Everything needed for a complete installation Include performance intake manifold, rubber flange, 42mm carb, high-flow K&N filter, air cleaner cover, breather kit and hardware 84-89 models require the use of 90-95 Big Twin-style cables

HSR45 Smoothbore Carburetor Kit $611.99 Mikuni HSR45 "Smoothbore" Carburetor Kit Kits include the redesigned 45mm smoothbore carb in a natural finish Easier, faster installation using stock CV throttle cables Excellent throttle response, more power, improved acceleration and better gas mileage Order fewer part numbers to cover more applications Installation instructions and hardware included Everything needed for a complete installation Include performance intake manifold, rubber flange, 45mm carb, high-flow K&N filter, air cleaner cover, breather kit and hardware 84-89 models require the use of 90-95 Big Twin-style cables

Carburetor Cleaner $11.95 Motorex Carburetor Cleaner Cleans air-intake canals, venturi tubes and carburetor bowls Suitable for use on all carburetor brands and types Will not harm catalytic converters 500ml

Edelbrock RPM Air-Gap Dual-Quad Intake Manifold/Carburetor Kit $1580.99 RPM Air-Gap Dual-Quad; Intake Manifold/Carburetor Kit; Incl. Intake/500cfm Carbs./Throttle Linkage/Fuel Line/Gaskets; Ford 351W; Endurashine;

47/49cc Performance Carburetor Kit $53.56 Performance carburetor and intake kit for 47/49cc, 2-stroke, reed-inducted engines. Includes: Large Float Carburetor Aluminum Intake Performance Air Filter Throttle Cable Reed Gasket

4-stroke Carburetor $33.22 Carburetor for 4-stroke Honda style horizontal cylinder engines commonly found on Chinese Dirt Bikes, ATVs, Dune Buggies/Karts, Mini-Choppers and Super Pocket Bikes. Venturi Opening: 32mm Bolt Hole Spacing: 49mm Left hand choke with forward facing intake

GY6 Carburetor $77.86 Stock Carburetor Type-1 for 150cc and 125cc GY6 4-stroke QMJ152/157 QMI152/157 engines. Shop categories of scooter parts , gas scooters , and electric scooters for sale. Includes electric choke Inner Diameter (intake side): 24mm Outer Diameter (intake side): 32mm Inner Diameter (air filter side): 38mm Outer Diameter(air filter side): 43mm

GY6 Intake Manifold $14.37 Intake Manifold fits 125/150cc GY6 engine. Connects the carburetor to the cylinder head. This is a common failure part because it is the only mounting point for the carburetor. Mounting hole distance from center to center: 45mm Intake cylinder head width: 22mm Carburetor end width: 30mm

36cc and 43cc 2-stroke Carburetor $24.29 Carburetor for 36cc or 43cc 2-stroke engines found on stand-up, mini-gas scooters. Venturi (Intake) Side Opening: 12 . 5mm Bolt Hole Spacing: 31mm

QMB139 50cc 4-stroke Carburetor $49.98 Carburetor Assembly for 50cc 4-stroke QMB139 engines. Shop our wide assortment of scooter parts , gas scooters , electric scooters , and motorized scooters for sale. Intake: 19mm Electric Choke

4-stroke Carburetor Adaptor $14.87 4-stroke Performance Carburetor Swivel Adaptor made from machined billet aluminum for 49cc, 70cc, 90cc, 100cc, 110cc, and 125cc 4-stroke Dirt Bikes and some ATVs. This adaptor mounts up to the intake manifold. It allows the carburetor to be mounted at different angles to accomodate large performance carburetors and multiple performance parts applications. The Intake internal diameter can be bored out for a larger carburetor size. Overall Diameter: 58 mm Inner Diameter: 21 mm Height: 10 mm Please specify Color when Ordering Comes in Blue, Gold, or Red

Traxxas TRA5234 Carburetor Body#44; Plug and ORing $30.67 Traxxas carburetor body fuel inlet plug and three orings.The carburetor body is constructed of composite material inlet plug is aluminum and Orings are rubber.This carburetor body is for the Traxxas 2.5 engine only. Height: 1.4 (35.5mm) including outlet and intake horns. Outlet Diameter: 0.53 (13.5mm). Intake Diameter: 0.51 (13mm).