Electric Scooters For Kids

Polini Variator

Lighter rollers = better acceleration, heavier rollers = higher top speed?

In the shop we are asked on an almost daily basis for lighter than standard rollers for improved acceleration or heavier rollers for higher top speed. There is widespread belief that rollers are a compromise whereby the rider can choose between higher acceleration at the expensive of some loss of top speed, or higher top speed at the expense of some acceleration. This therefore implies that there are no actually 'correct' rollers for a specific bike, and the best choice of rollers is ultimately down to user preference.

But is there actually any truth to this ?

First of all we need to consider powerbands. All engines make their maximum power at a specific rpm. The further you are away from this rpm the less power your engine is developing at that moment. As you tune an engine to develop more power the power increases but the peak power tends to occur at a higher rpm and tends to drop off much more quickly as the engine speed moves above or below this rpm, this is what's known as a narrow powerband.
A 2-stroke motocross bike is a good example of a narrow powerband engine, they normally have 6 close ratio gears to allow you to keep the bike revving highly all the time and to remain as close as possible to the rpm where all the power is developed. Because the powerband is so narrow there is virtually no power at lows revs and you have to work the bike to keep the revs within the narrow powerband all the time.

Similarly if you fit a power pipe to a ped without changing the rollers the bike at first seems slower because although the engine now has a higher power output the cost of this is that it occurs at higher revs and the powerband has narrowed. So whilst your bike might have developed enough power to happily pull away at 6500rpms with the standard pipe, the tuned and now more powerful bike with the pipe fitted actually develops less hp at 6500rpm than it did with the standard pipe and it struggles to pull away.

Because the engine only actually develops peak power at one specific rpm a geared bike or car is virtually never utilising it's peak power, it's only actually achieved for a brief moment as the revs pass through peak power rpm whilst accelerating. The best compromise for maximum *useable* power is to manage the gearing so as the engine can be kept as close as possible around this rpm for as long as possible.

Even a standard moped is actually in quite a high state of tune and already has a narrow powerband. A 1.0 litre car developing 50hp actually only develops half of the power per litre that a 50cc moped does producing 5hp.

To keep the moped within it's narrow powerband it uses a variator system. The idea is that if you know at what rpm the engine develops its maximum power, the variator system can be tuned to keep the engine at that specific rpm all the time meaning that peak power is available immediately and continuously at any time you mash the throttle.

So back on topic...
Ok, we all know that lighter rollers allow your engine to rev harder and vice versa, and that if the variator is working well it should hold the engine at a constant rpm dictated largely by the weight of the rollers.

But how does this effect top speed? It actually doesn't. Roller weight doesn't have any effect on top speed (except in unusual circumstances)

It's important to realise that the variator can only hold the rpm constant until it has adjusted itself all the way out, as soon as the road speed is reached at which the variator can no longer keep changing out the transmission becomes fixed gearing.

The printout below shows a Yamaha Aerox, pretty much standard with a Viper pipe and Polini variator fitted. The only difference between the graphs is that each run up is done with different weight rollers- 3.5g (blue line), 5g (red) and 6.5g (green).

If you look at point 'A' on each of the runs this shows the point at which the variator can no longer change the gearing (to keep the rpm constant) for each roller weight. As soon as this point is reached the gearing becomes 'fixed linear' meaning that the only way the speed can increase is if the engine rpm's are also increased in direct proportion. At line B on the printout the variator has fully changed all the way out for all the different roller weights and from this point on the engine rpm will always be the same relating to the road speed and consequently the power developed will be the same and so will the ultimate top speed.

After point B the engine rpms simply continue to increase for all examples until the power drops away as we move further and further away from peak power rpm until it no longer has enough power to accelerate further - this occurs at 60.5mph for all roller weights on our printout when the power developed by the engine has dropped to 3hp.

Having established that roller weight has no effect on top speed it becomes clear that there is only really one ideal roller weight for a specific bike when tuning for both acceleration and top speed. In a later article we'll discuss finding it and general variator tuning in more depth.

It's worth noting that the Polini variator is a vast improvement on the standard Aerox one which is particularly poor on even a mildly tuned Aerox. It's able to keep to revs constant far more uniformly meaning the engine is utilising it's available power much better and it's able to adjust out to a higher gearing than the standard one often meaning a significantly higher top speed even without a gear kit.

Note: there are special circumstances where the above information can be disputed, but it can be considered reliable for general use and road peds.

Pedparts UK

About the Author

Andy is the writer and webmaster of http://www.pedparts.co.uk a distributor of moped parts & accessories dedicated to offering excellent and reliable customer service.

POLINI PL2375BB Brand New Gentlemens Watch $125 POLINI PL2375BB Brand New Gents Watch

Variator Bushing $2.97 Variator Bushing for 50cc 4-stroke QMB139 engines. Shop our wide assortment of scooter parts , gas scooters , electric scooters , and motorized scooters for sale.

POLINI PL2973BB Brand New Watch With Genuine Crystals - Certificate Available. $125 POLINI PL2973BB Brand New Watch With Genuine Crystals

POLINI PL2896BB Brand New Watch With Genuine Crystals - Certificate Available. $125 POLINI PL2896BB Brand New Watch With Genuine Crystals

QMB139 Complete Variator Set $42.65 Complete Variator Set for 50cc 4-stroke QMB139 engines. Number of Teeth (drive face): 64 Number of Splines (drive face): 26 Outer Diameter (variator): 87mm Roller Weight: 8g Please see below for measurements

Minarelli Performance Variator Set $49.59 Malossi Style Performance Variator Set for 50cc Minarelli 2-stroke 1E and 1PE40QMB engines. Inner Diameter: 13mm Roller Weight Width: 13mm Overall Width of Variator: 97mm Includes everything pictured

Teflon Coated Variator Set $49.59 Performance Teflon Coated Pulley/Variator set for 125/150cc GY6 engines. This Pulley/Variator set has a special roller track design for a bigger contact surface and angle. Roller weights not included. Please see below for measurements

GY6 Racing Variator Set $39.67 GY6 Racing Variator Set. Roller weights not included. Outer Diameter: 115mm Inner Diameter: 24mm

Front Variator Plate $14.87 Front Variator Plate for 50cc 4-stroke QMB139 engines. Diameter: 87.5mm Center Hole: 20mm 13.75mm for each roller weight slot

Complete Variator Assembly $66.45 Variator Assembly for 250cc 4-stroke water-cooled CN250 172mm engines. Includes roller weights Outer Diameter: 5 inches Number of Splines: 21

Variator Back Plate $4.95 Variator Back Plate for 50cc 4-stroke QMB139 engines. Shop our wide assortment of scooter parts , gas scooters , electric scooters , and motorized scooters for sale. -ID 14 mm -OD 73.50 mm

GY6 Variator Assembly $79.35 Variator Assembly for 150cc and 125cc GY6 4-stroke QMI152/157 QMJ152/157 engines. Shop the largest selection of scooter parts , gas scooters , electric scooters , and motorized scooters for sale. Roller Diameter: 18mm Roller Width: 14mm Roller Weight: 13 grams

1000rpm Big Variator Spring $14.87 Performance 1000rpm "Big" Variator Spring for 150cc and 125cc GY6 4-stroke engine based vehicles. Designed to provide varying pressure to the sliding clutch plate for different acceleration purposes and tuning. Shop categories of scooter parts , gas scooters , and electric scooters for sale. 1000rpm Inner Diameter: 48.5mm Height: 152.5mm

Minarelli Variator Set $49.59 Shop the largest selection of scooter parts , gas scooters , electric scooters , and motorized scooters for sale. Malossi Style Performance Variator Set for 90cc Minarelli 2-stroke and 1E50QMF engines. Overall Width: 97mm Roller Weight Width: 13mm Center Hole Inner Diameter: 16mm

GY6 Variator Drive Face $12.39 Fixed Drive Face for 150cc and 125cc GY6 4-stroke QMI152/157 QMJ152/157 engines. Shop the largest selection of scooter parts , gas scooters , electric scooters , and motorized scooters for sale.

1500rmp Big Variator Spring $14.87 After-market sliding sheave spring. Designed to provide varying pressure to the sliding sheave throttle to allow for different acceleration purposes, 1500 RPM. 1500 RPM Total Length: 6 inches

Sliding Sheave Spring, 2000 RPM $14.87 Performance 2000rmp "Big" Variator Spring for 150cc and 125cc GY6 4-stroke engine based vehicles. Designed to provide varying pressure to the sliding variator plate for different acceleration purposes and tuning. 2000 RPM Total Length: 6 inches

1PE40QMB Roller Weights $13.38 Minarelli, 50cc 2-stroke 1PE40QMB Performance Roller Weights. We recommend starting performance upgrades by changing the variator roller weights before engaging in any performance upgrades. Heavier roller weights = A slower take off speed with more acceleration and a higher top speed. Lighter roller weights = A faster take off speed with less acceleration and lower top speed. Roller Diameter: 15mm Roller Width: 12mm

GY6 Roller Weights $11.89 1st Generation Roller Weights for 150cc and 125cc GY6 4-stroke QMI152/157 QMJ152/157 engines. We recommend starting performance upgrades by changing the variator roller weights first. Heavier roller weights = A slower take off speed with more acceleration and a higher top speed. Lighter roller weights = A faster take off speed with less acceleration and lower top speed. Size: 18x14

QMB139 Roller Weights 16x13 $13.88 Prima Roller Weights for 50cc 4-stroke QMB139 engines. The QMB139 is the most popular 50cc 4-stroke engine found on Chinese scooters. a We recommendastarting performance upgradesaby changingathe variator roller weightsafirst. a Heavier roller weights =aA slower take off speed with more acceleration and aahigheratop speed. Lighter roller weights = A faster take off speed withaless accelerationaand lower top speed. Size: 16x13

Hoca GY6 4T Conversion Power Pack Kit $499.98 New 4T Racing Kit for 150cc and 125cc GY6 4-stroke Scooters and engines. The Hoca GY6 4T kit includes everything you need to increase overall speed, horsepower and torque. Includes High Performance: Chrome Racing Muffler with Mounting Kit Chrome Header Pipe PWK 30mm HP Carburetor Billet Drive Face Chrome Power Intake High-Angle Camshaft 1500 RPM Torque Yellow Drive Spring Performance Clutch Machined Variator (115mm) Big Bore Kit (61mm) Complete Performance Cylinder Head Overall Height (cylinder): 90.3mm Please see below for measurements

Snow Trac $87.62 High Quality Content by WIKIPEDIA articles The Snow Trac is a small personal Snowcat that is roughly the size of a modern compact car. In 1954, Lars Larsson, the chief design engineer for a Swedish farm equipment company, AB Westerasmaskiner, decided to develop a tracked vehicle to take him and his brother on fishing trips in the winter. The company put his snow vehicle into production in 1957. It uses a unique steering mechanism called a variator that allows the steering of a tracked vehicle to use a traditional automotive steering wheel instead of levers. Author: Surhone, Lambert M./ Timpledon, Miriam T./ Marseken, Susan F. Binding Type: Paperback Number of Pages: 112 Publication Date: 2010/11/06 Language: English Dimensions: 9.02 x 5.98 x 0.27 inches

BMC Audi A3 8P 1.6i Carbon Dynamic Airbox $274 Data: 1.6i (102HP) Scope of delivery: CDA - box and installation material CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC VW Golf 4 R32 Carbon Dynamic Airbox $282 Data: 3.2i R32 (241HP) Scope of delivery: CDA - box and installation material CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC BMW E46 3series 316i/318i Carbon Dynamic Airbox $274 Data: all models, 316i / 318i Scope of delivery: CDA - box and installation material CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC BMW E46 3series 320i - 325i Carbon Dynamic Airbox $269 Data: all models, 320i / 323i / 325i Scope of delivery: CDA - box and installation material CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC Audi S4 B5 Carbon Dynamic Airbox $282 Data: 2.7i BiTurbo (265HP) Scope of delivery: CDA - box and installation material Notes: Move the cooling modules of the ignition and adaptor for original air intake is required. CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC BMW E46 M3 3series Carbon Dynamic Airbox $820 Data: M3 3.2i Scope of delivery: CDA - box and installation material CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC Mini Cooper S Carbon Dynamic Airbox $252 Data: Cooper S (163HP) Scope of delivery: CDA - box and installation material CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC MB M-Class W163 ML320 Carbon Dynamic Airbox $232 Data: ML320 (218HP) Scope of delivery: CDA - box and installation material CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC Opel Omega B 2.5TD Carbon Dynamic Airbox $238 Data: 2.5TD Scope of delivery: CDA - box and installation material CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC MB SLK R170 Carbon Dynamic Airbox $232 Data: SLK230K / SLK260 / SLK320 Scope of delivery: CDA - box and installation material CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC MB V-Class/Vito Carbon Dynamic Airbox $250 Data: V-Class 220CDi (122HP) / Vito 112CDi (122HP) Scope of delivery: CDA - box and installation material CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC Mini One Carbon Dynamic Airbox $204 Data: Mini One (90HP) Scope of delivery: CDA - box and installation material CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC Opel Astra G 2.0i 16V Turbo Carbon Dynamic Airbox $232 Data: 2.0i 16V Turbo (200HP) Scope of delivery: CDA - box and installation material CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC Audi A4 8E 3.0i Carbon Dynamic Airbox $232 Data: 3.0i V6 (220HP) Scope of delivery: CDA - box and installation material Notes: Reducer from 85mm to 80mm is required CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC Audi RS4 B5 Carbon Dynamic Airbox $282 Data: 2.7i BiTurbo (380HP) Scope of delivery: CDA - box and installation material Notes: Move the cooling modules of the ignition and adaptor for original air intake is required. CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC Audi TT 8N Carbon Dynamic Airbox (180HP) $274 Data: 1.8i Turbo (180HP) Scope of delivery: CDA - box and installation material CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC Audi TT 8N Carbon Dynamic Airbox (225HP) $274 Data: 1.8i Turbo (225HP) Scope of delivery: CDA - box and installation material CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.

BMC Audi TT 8N 3.2i Carbon Dynamic Airbox $282 Data: 3.2i (250HP) Scope of delivery: CDA - box and installation material CDA - Carbon Dynamic Airbox CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system. Thanks to the dynamic air intake you have a true supercharging system that conveys cold air at a speed and capacity much bigger than with traditional systems. The airflow entering through the dynamic intake is still further accelerated due to the conical flow variator inside the carbon dynamic air box. Finally, dynamic overboosting, greater airflow, higher pressure and colder air are the elements assuring a considerable increase in engine performance in power and torque. Thus demonstrated by several tests on a Dyno.